Silicon Graphics SGI Tezro Workstation

Description

Silicon Graphics SGI Tezro Workstation
Starting PROM Boot process
IP35 PROM SGI Version 6.211  built 04:16:18 PM Jan 25, 2008
*** Mixed standard and premium memory:
*** Treating all as standard.
Testing/Initializing memory ...............             DONE
Copying PROM code to memory ...............             DONE
Discovering local IO ......................             DONE
Discovering NUMAlink connectivity .........
Local hub NUMAlink is down.
*** Local network link down
DONE
Found 1 objects (1 hubs, 0 routers) in 5896 usec
Waiting for peers to complete discovery....             DONE
No other nodes present; becoming global master
Global master is /hw/rack/001/bay/01
Intializing any CPUless nodes..............             DONE
Checking partitioning information .........             DONE
No other nodes present; becoming partition master
Local slave entering slave loop
Loading BASEIO prom .......................             Local slave entering sla                                ve loop
Local slave entering slave loop
DONE
BASEIO PROM Monitor SGI Version 6.211  built 04:15:20 PM Jan 25, 2008 (BE64)
4 CPUs on 1 nodes found.
Automatic update of PROM environment disabled
Graphics diagnostics
Odyssey board #0 found on nasid 0
Running Odyssey xtalk sanity diag...
Board version 1 - Buzz revision 3B
On board sdram size: 128 Mb
Cas latency: CAS 3
4 banks by sdram module
Running Odyssey Buzz registers diag...
Device passed diagnostics
Installing PROM Device drivers ............
On-board (IO9) tigon3 1000BaseT interface
Base I/O Ethernet set to /dev/ethernet/tg0
Installing Graphics Console...
graphics install: searching for pipe 0
Probing IOC4 ATA adapter 2
IOC4 RevId = 79
Detected Vendor id/Product MATSHITA DVD-ROM SR-8588
Walking SCSI Adapter 0, (pci id 3)
1+ Device Vendor Product: HP 146 G ST3146855LC
2- 3- 4- 5- 6- 7- 8- 9- 10- 11- 12- 13- 14- 15- = 1 device(s)
Walking SCSI Adapter 1, (pci id 3)
1- 2- 3- 4- 5- 6- 7- 8- 9- 10- 11- 12- 13- 14- 15- = 0 device(s)
Initializing PROM Device drivers ..........
Initializing Base I/O Ethernet Interface...Done.
---------------Interface Configuration Summary----------------
ASIC|Revision|MAC Address       : 5701|B5|08:00:69:13:f5:52
Link Negotiation|Advertisement  : On|
Link|Speed|Duplex|Rx/Tx FlowCtrl: Up|1000|Full|Off/Off
--------------------------------------------------------------
DONE
IRIS console login: root
IRIX Release 6.5 IP35 IRIS
Copyright 1987-2006 Silicon Graphics, Inc. All Rights Reserved.
Last login: Tue Jul 20 16:37:03 EDT 2021 on :0
TERM = (vt100)
IRIS 1# hinv
4 700 MHZ IP35 Processors
CPU: MIPS R16000 Processor Chip Revision: 2.1
FPU: MIPS R16010 Floating Point Chip Revision: 2.1
Main memory size: 4096 Mbytes
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 4 Mbytes
Integral SCSI controller 2: Version IDE (ATA/ATAPI) IOC4
CDROM: unit 0 on SCSI controller 2
Integral SCSI controller 0: Version QL12160, low voltage differential
Disk drive: unit 1 on SCSI controller 0
Integral SCSI controller 1: Version QL12160, low voltage differential
IOC3/IOC4 serial port: tty3
IOC3/IOC4 serial port: tty4
Graphics board: V12
Integral Gigabit Ethernet: tg0, module 001c01, PCI bus 1 slot 4
Iris Audio Processor: version MAD revision 1, number 1
Iris Audio Processor: version RAD revision 13.0, number 1
XT-DIGVID Multi-standard Digital Video: controller 0, unit 0, version 0x0
IOC3/IOC4 external interrupts: 1
Dual Channel Display
The skins are poor, and the front panel is damaged.
The V12 is buggy and throwing CORRECTABLE_ECC_ERROR on the console.  GL is functional.
Thanks for looking !